Please report posts that do not follow the submission guidelines. Note: This configuration provides support for the Fuel Line so that it does not bend while the stuck Jet is being unscrewed.Gear can be Effective, Lightweight, or Inexpensive but not all three. For Jets that are severely stuck, a screwdriver may be placed through the “air hole” in the side of the Mixer Tube so that additional leverage is provided. While supporting the Fuel Line and Burner Assembly, use the Jet and Cable Tool to unscrew the Jet, turning it in a counterclockwise fashion. Re-insert the Elbow into the Mixer Tube, but the “wrong way,” with the Jet exposed rather than hidden, in other words the Jet should be “sticking out” so that it can be accessed with the Jet and Cable Tool. Then, orient the Fuel Line so that the Jet is also facing up. Once the Fuel Line is removed and free from the Legs, turn the Burner Assembly “upside-down,” placing it on a bench is preferable, with the slotted end of the Mixer Tube facing up. Following the stove instructions, remove the Fuel Line from the Burner Assembly. Stuck Jets can be removed by performing the following procedure: First, begin by familiarizing yourself with the Mixer Tube and different parts of the Fuel Line, these are described in your stove instructions. Note: Stuck Jets on the DragonFly and XGK stoves can be removed with a large screwdriver or a leverage-providing implement used in combination with the Jet and Cable Tool. The following tip applies to both models of the WhisperLite stove, the SimmerLite stove, and the WindPro stove. ![]() ![]() A frayed cable can damage the Fuel Tube O-ring when connecting the stove with the pump damaged O-rings can result in a dangerous fuel leaks, fire and personal injury. Do not grip the cable itself as this might result in fraying. If pliers are used, grip the weld at the tip of the cable only. Pliers may have to be used to remove a cable that cannot be pulled out with the Jet and Cable Tool, regardless of using a lubricant. Let the Fuel Line soak for a short time after which, refer to your stove instructions for Cleaning the Jet and Fuel Line. Note: Orienting the Fuel Line vertically will facilitate better flow of lubricant into the Fuel Line. Using a common lubricant spray, direct the “straw” inside the Elbow and spray a small amount, such that the lubricant is directed inside the Fuel Line. Remove the Jet by using the Jet and Cable Tool turn Jet counterclockwise to loosen and remove. For XGK model stoves, leave the Fuel Line and Enclosure intact while performing the following procedure. Note: The DragonFly stove does not have a cable. Stuck cables can be removed by performing the following procedure: First, begin by familiarizing yourself with different parts of the Fuel Line, which are described in your stove instructions. Therefore, it is important to perform routine maintenance on your stove. Diminished stove performance also results from lack of maintenance. In general, cables become stuck due to a lack of Fuel Line cleaning and maintenance. If you own the 1.0 L Personal system or a first-gen 1.8 L system and your stove mounts on top of the canister, you may use these pots:ĭo not use the larger 2.5 L Group Sauce Pot or 4.5 L Stock Pot on this top-mounted stove the larger pots are less stable on this stove. ![]() Therefore, the remote-canister stove is compatible with: It provides the necessary stability needed for the larger pots. This new design supports larger pots and is available in the WindBurner Duo System,Group System and Combo System.Įvery WindBurner pot is compatible with the new remote-canister stove. In 2017, we introduced the remote-canister design, in which the stove is remotely connected to the canister by a fuel line. It is available only in the smallest WindBurner system, the Personal 1.0 L System. The original threads directly onto the top of the canister. There are currently two WindBurner stove designs. This is because the pot and stove are specifically engineered to create an integrated system. WindBurner pots must be used only with WindBurner stoves.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |